To place an order to Alaska or Hawaii, please call (231) 252-4450, and one of our representatives would be happy to help!

HAGz Spring Clips (12 Pack)

  • Price $12.50 EACH

HAGZ® SPRING CLIP DETAILS 

12 Clips per bag.

image629

 

  • Stabilizes Body Grip Traps... Designed for 160's and smaller (XL version fits 220's-330's)
  • ALWAYS ATTACHED to your trap  
  • Works on 3/8" rods (fiberglass or steel)
  • Can also be used with the HAGz® Bracket for Extreme Versatility (stabilize on rocks, logs, etc) 
  • ​Weighs .52 Oz/each
  • Patent Pending  
  • Made in USA

 

HAGZ® SPRING CLIP BENEFITS

image630

 

  • Always ATTACHED to your TRAP! Never lose or forget it
  • Allows you to orient trigger wires in any position you want, not where the device allows (top, bottom, left, right)
  • Unleashes new setting opportunities.
  • Fast and Efficient; No need to find the 'perfect' stick that the spring eye will fit over
  • Small and non-intrusive, weighs .52 ounces and doesn't restrict the use of the spring eye
  • Great for those that pack in and are limited on pack basket space!

HOW IT WORKS

image631

 

  1. Insert The HAGz® Spring Clip between the rungs in the spring coils
  2. To use as an Adjustable Set: 
    1. Position Trap
      1. Set Body Grip Trap
      2. Slide the hole in the HAGz® Spring Clip over a 3/8" rod
      3. Release to allow the HAGz® Spring Clip to lock on the rod when at the desired height
  3. Optionally: For extreme versatility or to use so it falls-away - (Requires HAGz® Bracket)
    1. Mount HAGz® Bracket to virtually any object (stick, log, rock, bridge wall, etc)
    2. Set Body Grip Trap
    3. Insert the HAGz Spring Clip into either of the large slots in the HAGz® Bracket
    4. Wire/ Cable off trap as desired as it will release from the HAGz® Bracket when a catch is made
  4. Orient Trigger Wires: (up, down, left or right)
    1. Rotate the trap to orient triggers wires as desired
    2. Flipping the HAGz® Spring Clip over on the rod allows for 2 other trigger positions

 

HAGZ® SPRING CLIP INSTRUCTIONS

 

  1. Installing Clip:
    1. Using a wide, flat head screwdriver, open one of the rungs in the spring by 'wedging' it in and 'turning' it - (the wider the screwdriver the better) 
    2. Insert the Clips flat side between the spring coils - Inserting from the center of the spring eye and through the spring coil
    3. Remove the screw driver  
    4. Open the next spring rung 
    5. Using pliers, get a bite on the back of the clip and the outer edge of the spring and squeeze the clip through the spring
  2. Stabilizing Trap
    1. To use as an Adjustable Set: 
      1. Set Body Grip Trap
      2. Slide the hole in the HAGz® Spring Clip over a 3/8" rod
      3. Release to allow the HAGz® Spring Clip to lock on the rod when at the desired height
    2. Optionally: For extreme versatility or to use so it falls-away - (Requires HAGz® Bracket)
      1. Mount HAGz® Bracket to virtually any object (stick, log, rock, bridge wall, etc)
      2. Set Body Grip Trap
      3. Insert the HAGz® Spring Clip into either of the large slots in the HAGz® Bracket
      4. Wire/ Cable off trap as desired as it will release from the HAGz® Bracket when a catch is made
  3. Orient Trigger Wires: (up, down, left or right)
    1. Rotate the trap to orient triggers wires as desired
    2. Flipping the HAGz® Spring Clip over on the rod allows for 2 other trigger positions

 

TIP: *Installing clips in the same orientation, same spring side, etc makes it easier to understand trigger orientation based on how you run the clip on the rod