To place an order to Alaska or Hawaii, please call (231) 252-4450, and one of our representatives would be happy to help!
Any 2ND DAY AIR order's placed on Thursday's will arrive the following Monday.


  • Price $20.50 EACH

This easy-to-install, one-piece molded guard permanently stops costly damage to your roof vent boot and prevents leaks.  Quick installation and removal allows for plumber access whenever repairs are needed.  This product is available in three sizes with polypropylene blend materials and UV protection. 

Two set screws secure boot to plumbing stack.  Permanently stops squirrel and rodent damage.  One piece molded guard with UV protected color throughout. 

Installs in MINUTES!  

Covers: 1½" & 2" Lead Boots
Inside Diameter: 2⅞" 
Height: 10¼"
Weight: 0.95 lbs.

Vent Guard Installation

Safely & Quickly Installing the Roof Vent Boot Guard

After years of chicken wire covers, roofing tar, window screen, and zip ties, a permanent solution to roof lead boot damage is here! Keep out unwanted debris from your vents with this one-piece molded removable cover. Our vent cover features a protective grill on top and uses patented airflow technology to remove plumbing gas from your building quickly. Convenient pitch marks on the rear of the product make installation a breeze.

Vent Guard Installation

Installation Instructions

1. Replace the damaged lead boot prior to installing the Roof Vent Boot Guard. Make sure the lead is tightly formed around the plumbing pipe. Note: It may be necessary to form the lead boot into a cylindrical shape by tapping it with a hammer.

2. Back out set screws at base of Boot Guard. Place over lead stack. Lightly tap into place. Snug set screws into lead stack. Note: additional screws provided for use on 2 inch lead boots.

3. The pipe vent shield has already been molded to accommodate standard pitch roofs. To achieve a steeper angle, simply trim the material from the rear of the boot guard using pitch marks, which are provided on the bottom of the guard. They start at 5/12" on the bottom and end at 8/12" at the top mark.


Product Guarantee: The manufacturer will replace this product 10 years from the date of purchase if it fails to protect your property's lead boot from rodent damage after being properly installed.

Roof Vent Boot Guards

Great Customer Service. Very fast delivery. Good selection of colors. - Joseph T.

Worked great

Stopped the squirrels from chewing!! Was an easy install. I would definitely buy again. - Brandon Thomas

roof vent boot guard

I purchase three of your boot guards to secure three roof vents that had been attacked by squirrels. The damaged lead collars measured about 2 1/2' in diameter, and you advertised that they would go up to 2 7/8". I think that is correct. I installed the short screws before my repairman arrived, and he was able to install all three of the guards purchased in less than five minutes. Very profitable for him, I'm sure, and he declared himself impressed with the product. I have given this information to a friend with the same issue. Thanks. - Anonymous

Great solution

Used product after squirrels had chewed on lead boot. Caulked boot and slid boot guard overtop. Should be on all roof vents, great product ?? - Anonymous

Great solution

Used product after squirrels had chewed on lead boot. Caulked boot and slid boot guard overtop. Should be on all roof vents, great product ?? - Anonymous