Cool Vac 16 HP Insulation Removal Vacuum

  • Price $3,861.20 EACH
  • Reg Price $4,511.20

Features of the Cool-Vac 16

  • 1/4″ Hardox Liner protects the fan housing chamber. Fan housings are very expensive and run hundreds of dollars. This industrial wear strip inside the fan chamber to prevent highly abrasive fibers and foreign debris passing from damaging the housing.
  • A 20 inch diameter turbo sonic  FC blade [1. Forward Curve] eliminates wet fiber build up in the housing area. The turbulence created by the forward curvature sweeps the housing clean of debris.
  • Fully robotically welded high abrasion resistant fan blades reduce the chance of a catastrophic failure a due to operational stress. The blades are not spot welded, but a bead runs the entirety of the blade.
  • Computerized balanced blades which reduces wear to engine bearings.
  • 16 h.p. Briggs and Stratton Vanguard commercial duty engine (highly regarded as one of the most durable engines in its class), provides ample power to exceed production rates of any system in its class.
  • Powder-coated heavy gauge welded steel construction.

Specifications

  • 20 inch diameter abrasion resistant, 1/4″ blades with solid robotic welds, computer balanced. Turbo sonic / FC fan blade.
  • 6 input and output tubes for hose hook up.
  • 12 volt Magnetron Electronic Ignition system
  • Easy access battery location for quick service and battery charging
  • Safety inlet and outlet guards to reduce occupational hazards
  • 16 horse-power Briggs and Stratton Vanguard V twin engine with positive pressure lubrication.
  • Weight: 250 lbs.
  • Dimensions: 36 long x 30 wide x 48 high
  • No load pressure equals a maximum of 28 inches of water column
  • CFM rating is 3,600

Warranty

2 year vacuum, 3 year engine

 

CV-16 Insulation Removal Vacuum Features

  • Inexpensive to replace wear strip in the chamber

  • Innovative Turbo Sonic design which eliminates regular service and cleaning for the chamber. 

  • Fan blades (abrasion resistant) robotically welded w/ solid welds for reducing catastrophic failures because of operational stress. 
  • Dynamic, precision computer controlled balancing gives you a smooth rotating blade w/ minimal wear on the engine bearings.
  • Constructed with heavy gauge powder coated welded steel materials. 

Recommendations for hook-up:

Different hose length combinations to a maximum of 175 feet can be utilized effectively.  Large diameter hoses that have the shortest length enable maximum production rates. 

Recommendations: 

  • 25 feet x 6 inches diameter hose to use for exhaust 
  • 125 feet x 6 inches diameter hose reduction to 50 feet x 4 inches diameter for maximum vacuum suction in attic. (Hose separately priced).