BRANDGUARD CONTINUOUS SOFFIT VENT 120" X 3"

3” x 120” Soffit Vent Model # CS2011-FF

KEY SPECIFICATION

Product Spec Sheet

CS2011-FF 3” x 120” 108 Flange Front Custom sizes/materials AVAILABLE

BENEFITS:

1” flange front

10lbs

         

• Safety vents that are used in areas prone to wildfires, wind driven rain, or winddriven snow.

• Overlapping Baffle Protection (Patented)
  o AirFlowsthroughnormally
  o Resists the intrusion of Flame and Embers, Wind Driven Rain and

  Snow

• Approved for use throughout California and beyond

• Anti -Clogging Overlapping Baffles plus 1/8” mesh on back side of vent

• Prevents Rodent Entry

• 20 Year Warranty

• Easy to Install, Retrofit and Paint

  STANDARD MATERIALS

  ASTM A653/A653M- G90 hot dipped galvanized steel, 26GA
  ASTM D9092- mill phosphatized coating for painting. IF BONDERIZED ASTM b370- Sheet Copper, 16oz and 20oz IF GALVANIZED
  .025 x.025 hot dipped galvanized 23ga wire mesh

  Installation: Install like any other similar Ventilator Product on the market.

WARNING: Do NOT cut product prior to installation. This will void all warranties. If smaller lengths are needed, please measure and order custom lengths prior to installation

PLEASE CHOOSE YOUR DESIRED FLANGE

CONTINUOUS SOFFIT  VENTS	SIZE (L x W)	DESCRIPTION	Model #	Flange Type	Flange Description	NFVA (sq. in.)	Spec Sheet

	120" x 3.5"	Continuous Soffit Vent	CS2011-H	Hardie Board	5/16" Setback	120	Spec Sheet pdf
	120" x 3.5"	Continuous Soffit Vent	CS2011-FFS	Soffit Application	Flange Front	120	Spec Sheet pdf
	120" x 3.5"	Continuous Soffit Vent	CS2011-PG	Plaster Ground	7/8" Setback	120	Spec Sheet pdf
	120" x 3.5"	Continuous Soffit Vent	CS2011-FO	New Const. Foam	1" Setback	120	Spec Sheet pdf